Solid wood bunk bed, which is better for a child

When planning a bedroom setting, one often has to make a choice between comfort and free space. This problem is especially relevant for families with two or more children. If two separate berths are established, then there is no place to place a desk. An excellent solution is a bunk bed made of solid wood, which takes up less space, but provides a comfortable sleep for both children. The presence of models of different designs allows you to choose a product that fits perfectly into the interior.

Advantages and disadvantages

The most popular were wooden bunk beds in the setting of rooms of a small area. They allow you to maximize the use of space, free up space for the playing area or equipment of the workplace.

The main advantages of such products include:

Wood has high environmental characteristics, it contributes to the creation of an optimal microclimate inside the room. When heated, no harmful substances are released, so the product can be placed near heating systems;
Wooden bunk bed is easy to fit into any interior thanks to a wide selection of colors and textures;
In addition to a place to sleep, the product is equipped with roll-out drawers for storing bedding, built-in work surfaces, cabinets and cabinets;
Some products, if necessary, are disassembled into two separate single beds;
The wooden structure is distinguished by safety, stability, reliability. The corners are rounded, the upper tiers are equipped with protective sides;
The variety of possible decor options: the array is tinted with varnishes, covered with colored enamels, decorated with carvings and paintings;
Cost savings: a bunk bed with drawers made of solid wood replaces a whole set of children's furniture.

However, the use of such a piece of furniture has its limitations. Sleeping on the second floor is not recommended for children until they are 6 years old. If a bunk bed is used in the interior of a social institution, hostel, hostel, it will be difficult for elderly or sick people to climb to the second floor. Overly active children may fall from the upper tier or stairs.

It is not recommended to install such models in rooms with low ceilings. Using the second tier will be uncomfortable. In addition, a solid bed has considerable weight; it is very difficult to rearrange or transport it.

Changing bedding on the second tier requires some skill and skill. This is best done by parents.

Types of construction

The design of the bunk bed from solid wood may be different. The main models are playing loft beds, traditional vertical models, corner pieces, adult options from an array of hevea.

Classic direct products

Classical models are rectangular designs, where the sleeping blocks are located exactly one above the other. The upper tiers have fences around the entire perimeter or only in the head area. Protections can be made of MDF or chipboard, wooden battens. In this case, only a bed of natural wood will be completely safe for babies.

The lower tier can be used as a bed or sofa. Extend the functionality of removable fencing. When installing only the side and rear parts, it will be convenient to use the lower tier for relaxing, watching TV. Multilevel beds without fail have a staircase of steps, slats or built-in closed shelves.

Before buying a product, be sure to check the convenience of the stairs. Optimal and safe are models with handrails. Straight stairs are recommended for use by older children, kids choose inclined. The width of the steps should be sufficient so that the foot does not slip.

The most popular dimensions of a berth are 800x1900 cm, 900x2000 cm. The child grows quickly and such models will last for more than one year. The height of the tiers should allow the baby not only to lie, but also to sit on the bed. It is convenient when the product has a transformation mechanism that allows you to independently adjust the height of the tier.

Corner models

Models in which the upper and lower tiers are at right angles are suitable not only for babies, but also for adolescents, adults. In the catalogs you can find many photos of products with different layouts of beds, such wooden bunk beds are very popular.

The advantage of corner models is the good illumination of the lower sleeping block. It will be convenient to even read. Such beds are assembled on either side, staircases in them are more gentle. If shelves and drawers are integrated in the steps, then curly cutouts for children's handles are provided on the wings.

In some models, the lower tier on wheels is not structurally connected to the upper, which allows you to move it to the desired position. If the product is intended for adult and child sleep, then choose a model with an extended size of the lower berth. In the catalogs of furniture companies you can choose the most suitable project for a bunk bed made of wood. The best option for small apartments is a product with 3 sleeping places and a storage section.

The first tier is represented by a comfortable double bed, to which a storage section and a step design are adjacent. The second tier is presented in the form of a single bed for a child.

Products from the massif of a hevea

Such models are most often made in Malaysia. They are intended for teenagers and adults. Hevea is highly durable, which allows the structure to withstand a significant load. The arrangement of berths is proposed exactly one below the other, fixing the stairs to the side.

Game loft beds

For girls, products are offered in the form of fairy houses, carriages. Boys prefer models in the form of a bus, car, pirate ship. The basic design of the bed is made traditionally, sleeping places are located under each other.

Exterior styling is done with decorative details from painted furniture boards. The location of the stairs in different models varies depending on the type of product. In addition to sleeping blocks, two-story wooden game loft beds have shelves for toys with lighting, open sections for storing books. Some loft bed models have only one berth at the top. The lower tier is a play area or an integrated study desk.

When choosing a game bunk bed from solid pine or other wood, it is important to check the reliability of the structure. Be sure to use high-quality fittings and the presence of wall mounts. The height of the upper sides should be at least 30 cm greater than the height of the mattress.

Which wood is better

An array of hardwood and coniferous wood is used in the manufacture of beds. Each type of material has its advantages and application features:

Material from fruit trees (pears, apple trees) is not used for the manufacture of frames, as it has a low strength. But such an array is easily processed, therefore beautiful carved sides, partitions, and decorative elements are obtained from it;
Solid oak is used in the manufacture of beds that can withstand significant loads and changes in temperature and humidity. The frame will not only withstand all the pranks of kids, but also last for many years. Oak products have a high cost, are used in classic interiors. Oak bunk models look massive, therefore not suitable for small rooms. Bunk beds made of solid beech will have similar properties. But the beech does not tolerate too dry air;
Solid larch material is suitable for rooms with high humidity. It is characterized by strength, durability, has a high cost. You can install such beds even under awnings and in the open air, the design will not mold, rot or be damaged by insects;
The birch massif has a beautiful texture, good strength and durability. Birch veneer is often used to decorate pine products, which reduces the cost of the bed;
For cots, an array of ash is often chosen. The material is highly resistant to shock, scratch, and other damage. The natural texture of ash is similar to mahogany, so the models from it are very beautiful even without tinting.

But still the most popular variety on the furniture market is a pine bunk bed. It has an affordable cost, beautiful natural texture. Such a product looks attractive even without treatment with paints and varnishes, and with a decorative coating it will last a very long time. Solid pine has only one drawback - it is prone to swelling or drying out with excessive or insufficient humidity inside the room.

What colors exist

A wooden bunk bed will certainly become the main element of the bedroom interior. The array can be coated with a colorless or tinted varnish. In this case, the visibility of the natural texture of the material is preserved, the coating only emphasizes the pattern.

Lacquered beds are perfectly combined with other elements of the room’s decor: leather inserts, wrought metal elements, glass. Depending on individual preference, a lighter or darker varnish color is chosen. The primary color palette includes: wenge, walnut, beech, teak, rosewood, pine, ash, mahogany. Topcoat is offered matte, glossy, semi-gloss, semi-gloss. The varnish is chosen on an acrylic, urethane or nitrocellulose basis. It is important that the product is safe, because the child can chew on the side of the bed. The tool also helps to protect wood from drying out, moisture drops, minor damage.

Shiny light surfaces of the bed help visually expand the space, while dark products look strict and noble. In decorating a bed made of solid pine and other wood, colored enamels can be used. Such products look bright, children really like. The dye is used safe, resistant, completely hiding the texture of the array. Most often, polyurethane enamels of pink, blue, green, yellow and white are used. If the model is designed for children of different sexes, then choose a neutral orange, red, brown or beige. Solid colored furniture looks like plastic products, as the coating is dense, completely hides the natural texture.

Additional functions

The bunk bed from the array is equipped with additional elements that expand its functionality:

The ladder in some models is a vertically arranged drawers or closed shelves. Inside there are many small toys, clothes and shoes. The kid can open the door by a convenient handle or a curly neckline. Such stairs are safe with constant use, save the usable area of the room;
Under the lower tier are boxes for storing bedding and other textiles. To make them convenient to use, each drawer is equipped with roller legs;
An unusual solution to the use of two-tiered products is the addition of their playing area, consisting of a horizontal bar, Swedish wall, gymnastic rings, slides. Younger children will enjoy skiing, large children will be able to improve their physical fitness on sports elements;
Additional work surfaces stationary or folding. As a rule, they are located in the end parts of the structure. They allow you to not set up a separate desk, where the child can not only play and draw, but also learn. Small open shelves for storing books and stationery will create maximum comfort for your baby.

If you decide to purchase a two-story bed, but choose between wood and furniture boards, give preference to the array. The material is durable, environmentally friendly and has good energy. A large selection of diverse models consisting of beds or with advanced functionality allows not only to optimally use the room area, but also save on the purchase.